Power Station CFB Boiler Economizer with ASTM Certification for Central Heating
Productdetails
| Type: | Natuurlijke Omloop | Structuur: | van de soort gebruikt voor de vervaardiging van motorvoertuigen |
|---|---|---|---|
| Druk: | Laag/Hoge druk | Stijl: | Verticaal |
| Brandstof: | Steenkool / Gas / Steenkool / Waterwarmte | Uitvoer: | Warm water/Stoom |
| Gewicht: | 20000 kg | Oppervlaktebehandeling: | Geschilderd |
| Kale pijp OD: | 25-1650 mm | Kale pijpdikte: | 2-40 mm |
| Vindikte: | 00,6-3,0 mm | Vinhoogte: | 5-30 mm |
| Vinbuisveld: | 5-30 mm | Vinbuislengte: | ≤12000 mm |
| Materiaal: | Koolstofstaal, legering, austenitisch staal | ||
| Markeren |
ASTM Certification Boiler Economizer,Central Heating CFB Boiler Economizer,Power Station Boiler Economizer |
||
Productbeschrijving
| Parameter (Unit) | Specification (mm) |
|---|---|
| Bare pipe (OD) | 25-1650 |
| Bare pipe (Thickness) | 2-40 |
| Fin (Thickness) | 0.6-3.0 |
| Fin (Height) | 5-30 |
| Fin tube thread pitch | 5-30 |
| Fin tube length | ≤12000 |
- Impact test and strength calculation reports with complete materials documentation
- 100% NDT (non-destructive testing) of all steel plates, tubes, and electrodes
- Comprehensive weld inspection including X-ray, γ-ray, and liquid penetrant testing
- Hydraulic pressure testing to verify working pressure standards and safety
Producthoogtepunten
Power Station CFB Boiler Economizer Central Heating ASTM Certification Product Overview The economizer is a mechanical heat exchange device designed to reduce energy consumption by preheating fluids. This unit is specifically engineered for power station CFB (Circulating Fluidized Bed) steam boiler ...
Verwarming van de oppervlakte van de hogedrukketel met membraanwand Argonbooglassen voor biomassa ketel
High Pressure Power Boiler Heating Surface Membrane Wall Argon Arc Welding For Biomass Boiler Product Introduction Water wall panels with pins usually laid vertically on the inner wall of the furnace wall, it is mainly used to absorb the radiant heat emitted by the flame and high-temperature flue gas in the furnace.It is the main type of evaporating heating surface of all kinds of modern boilers and the basic component of boiler water circulation loop.Because of both cooling
Hoogfrequente las H Fin Tube Economizer Voor Kettels van Energiecentrales ASME
High Frequency Welding H Fin Tube Economizer For Power Plant Boiler ASME Product Description The boiler economizer is a device used to recover waste heat in industrial boilers, usually located at the tail of the flue of the boiler, which increases the feed water temperature and reduces fuel consumption by absorbing the heat of the flue gas, so as to achieve the effect of energy saving and emission reduction. But at the same time, as an environmental protection equipment, the
Carbon Steel SA192 Superheater Coil Argon Arc Las 100% PT
Product Description: A boiler superheater is an essential component in a boiler system, responsible for increasing the temperature of steam produced by the boiler. One of the key products in this category is the Superheater Coil, designed to enhance the efficiency and performance of boiler systems. This particular superheater is suitable for various fuels, including coal, oil, and biomass, making it versatile and adaptable to different energy sources. The Superheater Coil
Kessel Industrial SA210A1 Staal Kessel Economizer Warmtewisselaar ASME-certificering
Boiler Industrial SA210A1 Steel Boiler Economizer Heat Exchange Part ASME Certification Introduction The H-shaped finned tube is also known as the H-shaped fin tube, also known as the butterfly fin tube. It is to weld symmetrically two pieces of steel with an arc in the middle to form fins (ribs or butterflies), the frontal shape of which resembles the letter "H", so it is called the H-shaped finned tube. The two fins of the H-shaped fin tube are rectangular and approximately
Gebruik ons online contactformulier als u vragen heeft, ons team zal u zo snel mogelijk contacteren.
