Industrial Usage Boiler Economizer with Natural Circulation and 1 Year Warranty for Energy Saving
Productdetails
| Type: | Natuurlijke Omloop | Structuur: | van de soort gebruikt voor de vervaardiging van motorvoertuigen |
|---|---|---|---|
| Druk: | Laag/Hoge druk | Stijl: | Verticaal |
| Brandstof: | Koolbrandstoffen | Uitvoer: | Warm water/Stoom |
| Oppervlaktebehandeling: | Geschilderd | Kale pijp OD: | 25-1650 mm |
| Kale pijpdikte: | 2-40 mm | Vindikte: | 00,6-3,0 mm |
| Vinhoogte: | 5-30 mm | Vinbuisveld: | 5-30 mm |
| Vinbuislengte: | ≤12000 mm | Materiaal: | Koolstofstaal, legering, austenitisch staal |
| Hydraulische test: | Standaard werkdruk | ||
| Markeren |
Industrial Usage Boiler Economizer,Natural Circulation Boiler Economizer,1 Year Warranty Boiler Economizer |
||
Productbeschrijving
The economizer performs a key function in providing high overall boiler thermal efficiency by recovering low-level energy from flue gas before it's exhausted to the atmosphere. This energy recovery occurs by heating the boiler feedwater.
Economizers are tubular heat transfer surfaces that preheat boiler feed water before it enters the steam drum or furnace surfaces. They reduce operating costs by recovering extra energy from flue gas, resulting in significant fuel savings.
Economizers also reduce the potential for thermal shock and strong water temperature fluctuations as feed water enters the drum or waterwalls. Increasingly stringent environmental regulations limiting nitrogen oxides and sulfur dioxide emissions can affect economizer design.
The gas-side heat transfer coefficient is much less than the water-side coefficient. To compensate, the outer surface of tubes may be finned to increase heat transfer surface area. The ultimate goal of economizer design is to achieve necessary heat transfer at minimum cost, with maximum allowable flue gas velocity being a key design criterion.
| Name (unit) | Specification (mm) |
|---|---|
| Bare pipe (OD) | 25-1650 |
| Bare pipe (Thickness) | 2-40 |
| Fin (Thickness) | 0.6-3.0 |
| Fin (Height) | 5-30 |
| Fin tube thread pitch | 5-30 |
| Fin tube length | ≤12000 |
Material: Carbon Steel, Alloy, Austenitic Steel (Nickel and Chromium or Manganese)
- Impact test and Strength calculation report with applied materials information
- 100% NDT (non-destructive inspection) report of steel plate, tube and electrode
- X-ray, γ-ray and liquid penetrant test inspection report (welding seam) to ensure the quality of the entire boiler
- Hydraulic test report to ensure standard working pressure and safety
Producthoogtepunten
Wood Fired Generators Boiler Economizer for Portable Steam Boiler Introduction The economizer performs a key function in providing high overall boiler thermal efficiency by recovering low-level energy from flue gas before it's exhausted to the atmosphere. This energy recovery occurs by heating the ...
Verwarming van de oppervlakte van de hogedrukketel met membraanwand Argonbooglassen voor biomassa ketel
High Pressure Power Boiler Heating Surface Membrane Wall Argon Arc Welding For Biomass Boiler Product Introduction Water wall panels with pins usually laid vertically on the inner wall of the furnace wall, it is mainly used to absorb the radiant heat emitted by the flame and high-temperature flue gas in the furnace.It is the main type of evaporating heating surface of all kinds of modern boilers and the basic component of boiler water circulation loop.Because of both cooling
Hoogfrequente las H Fin Tube Economizer Voor Kettels van Energiecentrales ASME
High Frequency Welding H Fin Tube Economizer For Power Plant Boiler ASME Product Description The boiler economizer is a device used to recover waste heat in industrial boilers, usually located at the tail of the flue of the boiler, which increases the feed water temperature and reduces fuel consumption by absorbing the heat of the flue gas, so as to achieve the effect of energy saving and emission reduction. But at the same time, as an environmental protection equipment, the
Carbon Steel SA192 Superheater Coil Argon Arc Las 100% PT
Product Description: A boiler superheater is an essential component in a boiler system, responsible for increasing the temperature of steam produced by the boiler. One of the key products in this category is the Superheater Coil, designed to enhance the efficiency and performance of boiler systems. This particular superheater is suitable for various fuels, including coal, oil, and biomass, making it versatile and adaptable to different energy sources. The Superheater Coil
Kessel Industrial SA210A1 Staal Kessel Economizer Warmtewisselaar ASME-certificering
Boiler Industrial SA210A1 Steel Boiler Economizer Heat Exchange Part ASME Certification Introduction The H-shaped finned tube is also known as the H-shaped fin tube, also known as the butterfly fin tube. It is to weld symmetrically two pieces of steel with an arc in the middle to form fins (ribs or butterflies), the frontal shape of which resembles the letter "H", so it is called the H-shaped finned tube. The two fins of the H-shaped fin tube are rectangular and approximately
Gebruik ons online contactformulier als u vragen heeft, ons team zal u zo snel mogelijk contacteren.
