Oliegestookte/Met gas Stoomketel, het Industriële Hoge rendement van Stoomgenerators
Productdetails
| Voorwaarde: | Nieuw | Structuur: | Brandbuis |
|---|---|---|---|
| Beschikbare brandstof: | Met gas, diesel-In brand gestoken olie-Fird, | Geschatte Werkdruk (Mpa): | 1.0-1.25 |
| Geschatte het verwarmen capaciteit: | 1.4-14 (mw) | Geschatte stoomtemperatuur: | 184-193 |
| Oppervlaktebehandeling: | Geschilderd | Verrichting: | Automatisch |
| Typische Gebruiker: | Voedsel en Textiel en Hotel en Oliegestookt | Placemen: | Horizontale Boiler |
| Markeren |
Industriële Stoomketel,Met kolen gestookte Warm waterboiler |
||
Productbeschrijving
Opmerkelijke Energie - besparingseffect WNS de OLIE (GAS) stak de Boiler van het Stoomwarme water met Snelle Installatie in brand
Structurele eigenschappen
WNS-boiler van de het warme watercondensatie van de olie (gas) de in brand gestoken stoom. Externe geïntegreerde het type van vinbuis economiser. Onafhankelijke condensator, compacte structuur, geschikte reparatie, de energie - het besparingseffect is opmerkelijk. De thermische efficiency kon 100% volgens lage calorische waarde van brandstof. Op gebruikersverzoek, kon de boiler PLC controle, en van op afstand bediende reserveinterface gebruiken.
Het prestatiesvoordeel
- Gebruik de natte voeringsstructuur, oven het verwarmen de achter, symmetrische lay-out van de oppervlaktegolf, verminder effectief de thermische spanning, verbetert de veiligheid en het leven van de boiler.
- Het gebruiken van de buis van de draadrook om het effect van de hitteoverdracht van verwarmingspijppijp te verbeteren.
- Boiler het verwarmen de redelijke, hoge thermische efficiency van de oppervlaktelay-out, snel begin.
- De stoomketelverbrandingskamer keurt lage positie goed, zodat de de veiligheidswaaier van de boilerwaterspiegel groter is, de boilerstoom is groter, is de stoomkwaliteit goed gewaarborgd.
- Gebruikend internationaal goed-ken merkbrander en het geavanceerde automatische controlesysteem, de verbranding is stabielere, geschiktere verrichting, verrichting meer veiligheid.
- De boilerstructuur is compacte, kleine voetafdruk, snelle installatie.

Parameter
| Model | WNS 2-1,0-y, Q | WNS 4-1.25Y, Q | WNS 6-1,25-y, Q | WNS 8-1,25-y, Q | WNS 10-1,25-y, Q | WNS 15-1,25-y, Q | WNS 20-1,25-y, Q | |
| Geschatte verdampingscapaciteit (t/h) | 2 | 4 | 6 | 8 | 10 | 15 | 20 | |
| Geschatte werkdruk (MPa) | 1.0 | 1.25 | 1.25 | 1.25 | 1.25 | 1.25 | 1.25 | |
| Geschatte stoomtemperatuur | 184 | 193 | 193 | 193 | 193 | 193 | 193 | |
| Slijtage-levering temperatuur | 20 | 20 | 60 | 60 | 60 | 104 | 104 | |
| Boilervolume (m3) | 3.2 | 7.4 | 10.6 | 11.7 | 14.4 | 16.8 | 21.2 | |
| Ontwerpefficiency (%) | 90 | 90 | 90 | 90 | 90 | 90 | 90 | |
| Toepasselijke brandstof |
De lichte olie, zware olie, naturagas, maakte gas en stedelijk steenkolengas vloeibaar | |||||||
| Extemalgrootte | Lengte A (mm) | 5084 | 6022 | 7151 | 7600 | 8360 | 9050 | 9650 |
| Breedte B (mm) | 2450 | 2700 | 2800 | 3000 | 3000 | 4500 | 5000 | |
| Hoogte H (mm) | 2380 | 2684 | 2882 | 3200 | 3200 | 5200 | 5600 | |
| Boilergewicht (t) | 7.2 | 12.6 | 17.2 | 18.6 | 23.5 | 36.2 | 45.5 | |
| Diamater van het hoofdstoom openen (mm) | 65 | 100 | 125 | 150 | 150 | 200 | 200 | |
| Diameter van veiligheidsklep (mm) | 40×2 | 50×2 | 65×2 | 65×2 | 80×2 | 100×2 | 100×3 | |
| Schoorsteen diamater (mm) | 350 | 450 | 600 | 700 | 750 | 900 | 1000 | |
Concurrentievoordeel
De kwaliteitscontrole en het beheer aan het geheel stellen proces, met inbegrip van baaruitsmelting, warmwalsen, thermische behandeling, het machinaal bewerken en strikt definitieve inspectie voorafgaand aan levering op.
Uitstekende productkwaliteit en de dienst, concurrerende prijs, „in time“ levering

Producthoogtepunten
Opmerkelijke Energie - besparingseffect WNS de OLIE (GAS) stak de Boiler van het Stoomwarme water met Snelle Installatie in brand Structurele eigenschappenWNS-boiler van de het warme watercondensatie van de olie (gas) de in brand gestoken stoom. Externe geïntegreerde het type van vinbuis economiser. ...
Verwarming van de oppervlakte van de hogedrukketel met membraanwand Argonbooglassen voor biomassa ketel
High Pressure Power Boiler Heating Surface Membrane Wall Argon Arc Welding For Biomass Boiler Product Introduction Water wall panels with pins usually laid vertically on the inner wall of the furnace wall, it is mainly used to absorb the radiant heat emitted by the flame and high-temperature flue gas in the furnace.It is the main type of evaporating heating surface of all kinds of modern boilers and the basic component of boiler water circulation loop.Because of both cooling
Hoogfrequente las H Fin Tube Economizer Voor Kettels van Energiecentrales ASME
High Frequency Welding H Fin Tube Economizer For Power Plant Boiler ASME Product Description The boiler economizer is a device used to recover waste heat in industrial boilers, usually located at the tail of the flue of the boiler, which increases the feed water temperature and reduces fuel consumption by absorbing the heat of the flue gas, so as to achieve the effect of energy saving and emission reduction. But at the same time, as an environmental protection equipment, the
Carbon Steel SA192 Superheater Coil Argon Arc Las 100% PT
Product Description: A boiler superheater is an essential component in a boiler system, responsible for increasing the temperature of steam produced by the boiler. One of the key products in this category is the Superheater Coil, designed to enhance the efficiency and performance of boiler systems. This particular superheater is suitable for various fuels, including coal, oil, and biomass, making it versatile and adaptable to different energy sources. The Superheater Coil
Kessel Industrial SA210A1 Staal Kessel Economizer Warmtewisselaar ASME-certificering
Boiler Industrial SA210A1 Steel Boiler Economizer Heat Exchange Part ASME Certification Introduction The H-shaped finned tube is also known as the H-shaped fin tube, also known as the butterfly fin tube. It is to weld symmetrically two pieces of steel with an arc in the middle to form fins (ribs or butterflies), the frontal shape of which resembles the letter "H", so it is called the H-shaped finned tube. The two fins of the H-shaped fin tube are rectangular and approximately
Gebruik ons online contactformulier als u vragen heeft, ons team zal u zo snel mogelijk contacteren.